Airsoft Gun Trigger Works but Doesn't Work

There may be a number of reasons why your airsoft gun wont shoot. The reasons range from unproblematic wiring bug to more serious ones like gears with broken teeth.

Reasons Why Airsoft Gun Wont Shoot

First, here are a few reasons why an airsoft gun wont shoot:

Reason 1: You Used Low Quality BBs

Low quality Bulletin board system can damage your airsoft Gun in many means. The beginning one is that a poorly made airsoft BB leaves fragments within your airsoft gun and this will cause the gears to start jamming up and breaking.

The other fashion that poorly fabricated airsoft BBs damage airsoft guns is reducing the accuracy of the trajectory of your shot. This happens when Bulletin board system that have seams scratch the barrel and outset deforming it. With plenty wear and tear, the butt starts pointing your Bulletin board system the incorrect direction.

Choosing the right Bbs volition extend the lifespan of your airsoft gun and reduce the number times that information technology jams

How to Prepare This

Utilise high quality BBs: The best quality BBs are double polished and have no seams. They demand to exist perfectly circular and take consistency from BB to BB. Cheap bulletin board system come with a lot of inconsistencies and seams on the bb body.

A good style of testing for consistency is picking a handfull of BBs from the handbag and looking carefully at each bb for imperfections. Brands with a low number of Bulletin board system that are deformed are the all-time to utilise.

The best BB brands are perfectly smooth and have no seams. This prevents them from scratching the inner barrel of your airsoft gun and changing the internal dynamics of how your gun shoots.

Making sure that you lot have the right Bulletin board system for your gun also helps to prevent jamming. If your gun uses a metal gearbox, y'all will need to utilise 0.20gram BBs or higher.

Here is a short video by John Douch on why y'all should not use cheap bbs

Reason ii: You lot Blew a Fuse

If your gun does zilch when you pull the trigger, even on a total charge, its possible that you take diddled the fuse to your gun.

One reason for this happening is when the gears jam and the gun trys to send besides much energy to gratis up the gun.

Another problem is the wiring tangling together with the motor pinion causing a short excursion. When two wires that are not supposed to impact come into contact, this will cause a short circuit.

The other reason may be that you lot are using the wrong fuse for your gun. Check with the manufacturer to notice out the appropriate fuse for your gun if this is the problem.

How to Set a Broken Fuse on an Airsoft Gun

Hither is a video explaining where to observe your airsoft gun's fuse and how to replace it.

Yous can tell that a fuse is blown by checking if the wire going through the fuse is all connected. If it is cleaved or discolored, then is probably blown. Another way to check if information technology its the fuse is to connect the two ends without the fuse and try to shoot the gun. If information technology shoots ,then you know that information technology is the fuse.

A diddled fuse is likely the symptom of a bigger problem. If the problem keeps recurring, you lot will need to investigate farther to find the root cause.

If the trouble is wiring short circuiting, you will need to exercise rewiring of the airsoft gun. This can exist a daunting chore and here is a video that will give yous an idea of what is involved.

Reason 3: Burnt Trigger Contacts

This ordinarily happens when black residue builds up on your trigger contacts. This is due to arcing that happens on the trigger contacts. Single fire puts a lot of carbon on the trigger contacts due to arcing. This is usually over a long menstruation and the gun may work fine for a while only when the carbon builds up, the gun may somewhen cease working.

How to set burnt trigger contacts on your airsoft gun

This is really a quick ready: accept apart your gun and clean the tips with a soft damp fabric. Make certain everything is dry before assembling the airsoft gun back together.

When cleaning the gun doesn't help, and so y'all can try the solution given by Jeffie Jeff. This will involve replacing the contacts so please read up on how to replace the contacts in your own airsoft gun before you open upwardly your airsoft gun.

Other Reasons

Reason four: Worn Out Motor Castor Springs

Reason 5: Cut Wires on the Airsoft Gun

Reason half-dozen: Locked/Jammed Gearbox

Reason 7: Broken Gears

Reason 8: Burnt Trigger Contacts

Reason ix: Stripped Piston